Ricoh LDD280 - Manual (Page 2)

Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the machine.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this mamual.
• Type1 (Pixel Density 600
× 600 dpi): CP6346/LDD280/HQ9000/3590DNP
• Type2 (Pixel Density 400
× 400 dpi): CP6334/LDD250/HQ7000/3580DNP
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good print quality, the supplier recommends that you use genuine master and ink from the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products.
Power Source
120V, 60Hz, 3.2A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
see p.170 “Power Connection”.
Trademark
PostScript ® and Acrobat ® are registered trademarks of Adobe Systems Incorporated.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.
Symbols
In accordance with IEC 60417, this machine uses the following symbols for the main switch:
• a means POWER ON.
• b means POWER OFF.