Ricoh LDD280 - Manual (Page 69)

Sample Print and Adjustment
57
2
Note
❒ When you shift the image for-
ward, leave a 10 mm, 0.4" mar-
gin at the leading edge. If there
is no margin, paper might wrap
around the drum and cause a
misfeed.
❒ One push of either scroll key
shifts the image position by 0.25
mm, 0.01".
❒ The {T} and {U} keys shift the
image up to 10 mm, 0.4" in each
direction.
❒ The {V} and {W} keys shift the
image up to 15 mm, 0.6" in each
direction.
❒ When you reset to the standard
position, press the {Initial posi-
tion}
key.
C
Press [Exit].
D
Press the {Proof} key to check the
image position.
Changing the Printing Speed
Use the {W} or {V} key to adjust the
printing speed. The relationship be-
tween printing speed and print quali-
ty depends on the type of paper you
use.
Limitation
❒ When printing on paper longer than
364 mm or 14.4", the maximum print
speed is 120 sheets/minute.
❒ When selcting thick paper or spe-
cial paper on “Feed Tray Paper
Type”, the maximum print speed
is 120 sheets/minute.
A
Press the {V} key to increase the
speed, or the {W} key to reduce
the speed.
The printing speed changes in six
increments as follows:
1. 60 sheets/minute
2. 75 sheets/minute
3. 90 sheets/minute
4.
105 sheets/minute
5.
120 sheets/minute
6.
135 sheets/minute
AJK440S
AJK142S