Ricoh LDD280 - Manual (Page 158)

Troubleshooting
146
4
kRemoving the Used Master
When k lights, it is time to empty the
master eject unit. It also lights when
the master eject unit is not set proper-
ly.
Note
❒ Ink is easily removed from skin by
waterless hand cleaners followed
by washing with soap and water.
❒ Be careful not to get any ink on
your clothing while emptying the
master eject unit.
❒ When Higher Security is on, you
have to enter the security code to
unlock the master eject unit.
A
Prepare a container for the used
master.
B
Open the front door.
C
Use handle (E1) to pull out the
master eject unit until it stops.
D
Pull up handle (E2) and pull out
the master eject unit completely.
E
Hold the master eject unit upper
handle and turn it clockwise with
one hand while holding handle
(E1) with other hand (1).
F
Remove the used master by push-
ing down the handle (1) towards
the waste container (2).
Note
❒ If you cannot remove the used
master completely, repeat step
F until all the master is re-
moved.
G
Reinstall the master eject unit,
making sure it clicks into posi-
tion.
H
Close the front cover.