Printing onto various kinds of paper, Printing onto thick paper, Printing onto standard paper – Ricoh LDD280 User Manual
Page 61: Printing onto envelopes, See p.49 “printing onto various kinds of paper, 2printing onto various kinds of paper
Printing onto Various Kinds of Paper
49
2
Printing onto Various Kinds of Paper
Before printing onto thick paper, thin
paper, envelopes or special kinds of
paper loaded in the paper feed tray,
you must select the paper type.
Printing onto Thick Paper
If you wish to print onto thick (128 to
209.3 g/m
2
, 34 to 55.6 lb or heavier)
paper, perform the following steps.
A
Press [Feed Tray Paper Type].
B
Press [Thick Paper].
C
Press [Change Settings].
D
Press [OK].
Printing onto Standard Paper
If you wish to print onto standard
(47.1 to 105 g/m
2
, 12.5 to 28 lb) paper,
perform the following steps.
A
Press [Feed Tray Paper Type].
B
Make sure that [Normal] is select-
ed.
C
Press [OK].
Printing onto Envelopes
A
Press [Feed Tray Paper Type].
B
Select [Special Paper] .
C
Press [Change Settings]
D
Press [OK].
E
Place the envelopes in the paper
feed tray as shown in the illustra-
tion.
* Paper feed direction
Note
❒ When you use envelopes, the
paper feed tray capacity is
about 150 sheets (85 g/m
2
, 22 lb)
or enough to load a stack up to
105 mm, 4.1" high.
F
If your envelopes do not feed in
well, lift the paper feed tray a lit-
tle, and then lower it so that it
slants up slightly.
GRENVE0E
ZDZY030E