Maintaining your machine, Cleaning the exposure glass, Cleaning the exposure glass cover – Ricoh LDD280 User Manual
Page 184: P.172 “cleaning the ex- posure glass cover, P.172 “cleaning the exposure glass, 6maintaining your machine
Remarks
172
6
Maintaining Your Machine
To maintain high print quality, clean
the following parts and units regularly.
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
Cleaning the Exposure Glass
A
Lift the exposure glass cover or
ADF.
B
Clean
A and B.
Note
❒ When using the exposure glass,
clean
B only.
Cleaning the exposure glass
cover
A
Lift the exposure glass cover.
B
Clean the exposure glass cover
with a damp cloth and wipe it
with a dry cloth.
Note
❒ If you do not clean the exposure
glass cover, marks on the cover
will be printed.
ZDCH130E
AM1P0100