Ricoh LDD280 - Manual (Page 155)

Changing the Paper Size
143
4
Changing the Paper Size
Changing the Paper Size of the
Paper Feed Tray
A
Remove the paper from paper feed
tray.
The paper feed tray will lower.
B
Make sure that the paper feed
side plates knob lock lever is
raised (lock is released), and then
grasp the paper feed side plates
knob and adjust the paper feed
side plates to match the paper
size.
Important
❒ Always adjust the position with
the lock lever for the paper feed
side plates in the raised position
(lock released).
C
Place the paper on the paper feed
tray.
Note
❒ Correct the paper curl before
loading the paper. If you cannot
do so, stack the paper with the
curl face down.
D
Make sure that the paper feed side
plates are touching both sides of
the paper, and then push the lock
lever for the side plates down to
lock the side plates into position.
Important
❒ Always make sure that you
push the lock lever for the side
plates down to lock the side
plates into position.
Note
❒ Make sure that the paper size
and orientation in the display
panel correspond with the actu-
al paper size and orientation set
on the paper feed tray.
ACY009S
ACY007S
ACY008S
ZDCY041E