Turning on the power, Turning on the main power – Ricoh LDD280 User Manual
Page 34
22
Turning On the Power
❖ Main switch (left side of the machine)
Press to activate the machine.
When the machine has finished
warming up, you can make master
and prints.
Turning off this switch will com-
pletely turn off power to the ma-
chine.
❖ Operation switch (right side of the
control panel)
Press to activate the machine.
When the machine has finished
warming up, you can make master
and prints.
Note
❒ This machine automatically enters
Energy Saver Mode or turns itself
off if you do not use it for a certain
period. See p.48 “Saving Energy”
and p.48 “Auto Off Timer”.
Turning On the Main Power
A
Make sure that the power cord is
firmly plugged into the wall outlet.
B
Open the switch cover and turn
on the main switch.
The main power indicator turns
on.
Important
❒ Do not turn off the main power
immediately after it has been
turned on. Otherwise it may re-
sult in damage to the hard disk
or memory, leading to the mal-
functioning of the machine.
AJK444S