Ricoh LDD280 - Manual (Page 159)

When Multiple Sheets Are Fed at the Same Time
147
4
When Multiple Sheets Are Fed at the Same
Time
Follow the procedure below to cor-
rect a multiple sheet feed problem of
the LCIT.
A
Adjust the feeding pressure lever
of the LCIT according to the
thickness of the paper loaded.
Note
❒ The appropriate feeding pres-
sure lever positions according
to the weight of the paper are as
follows.
❒ If multiple sheets of paper are
fed at the same time when the
feeding pressure lever is set to
Standard, set the feeding pres-
sure lever to Thin.
❒ If paper is not fed at all when
the feeding pressure lever is set
to Thin, set the feeding pressure
lever to Standard.
❒ Paper heavier than 127.9 – 209.3
g/m 2 (34.0 – 55.6 lb.) is catego-
rized as thick paper. However,
for B5 JIS paper heavier than
127.9 g/m
2 (34.0 lb.), set the
feeding pressure lever to Stan-
dard.
❒ When paper is still not fed prop-
erly even after the feeding pres-
sure lever is adjusted, increase
the paper feeding pressure of
the machine.
B
If the problem still persists, take
the paper out and fan it before
loading it again.
Metric
version Inch ver-
sion
Thick 127.9 – 209.3
g/m
2
34.0 – 55.6
lb.
Standard 52.3 – 127.9
g/m
2
13.9 – 34.0
lb.
Thin 47.1 – 52.3
g/m
2
12.5 – 13.9
lb.
ABQ025S
TPEY080J