Ricoh PRIPORT JP730 - Manual (Page 108)

Operation
20
1
Adjusting the Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways to do this:
❖ Before Making a Master
Adjust the image density using the
{Image Density} key.
❖ After Making a Master
Adjust the image density using the
{Speed} key.
Before Making a Master
A
Use the {Image Density} key before
pressing the {Master Making} key.
Note
❒ In addition to Normal, Darker
and Lighter modes, you can also
select Tint mode to make half-
tone prints. When the Lighter
mode indicator is blinking, Tint
mode is selected.
After Making a Master
A
Press the {Speed} key to decrease
the printing speed. Press it again
to bring the printing speed back
to Fast.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Titanium2_EN-F2_FM_forPaper.book Page 20 Wednesday, January 25, 2006 6:30 PM