Rp r p, Printing in two colours – Ricoh PRIPORT JP730 User Manual
Page 41
Colour Printing Using the Optional Colour Drum
35
2
GGGG
Slide in the drum unit until it
locks in position.
HHHH
Lower the drum unit lock lever.
IIII
Close the front door.
Note
❒ Make sure that the Cover Open
indicator (
M) turns off.
Printing in Two Colours
After printing in one colour, you can
print in another colour on the same
side of the print.
Important
❒ Allow the prints to dry for a while
before printing the second colour.
❒ If the prints are still wet when you
print on them again, the paper feed
roller might become dirty. In this
case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colours at
a time.
AAAA
Prepare two originals. Place the
first original in the document
feeder.
BBBB
Press the
{{{{Master Making}}}} key.
GRCOLO0E
R
P
R
P
Titanium_GB-F_FM.book Page 35 Thursday, December 26, 2002 10:13 AM