Ricoh PRIPORT JP730 - Manual (Page 28)

Operation
22
1
Stopping the Machine during the Multi-print
Run
When You Want to Stop the
Machine during the Multi-print
Run and Print the Next
Original
AAAA
Press the
{{{{Clear/Stop}}}} key.
BBBB
Place the new original in the doc-
ument feeder.
CCCC
Enter the number of prints and
press the
{{{{Master Making}}}} key.
When You Want to Change the
Number of Prints Entered or
Check the Completed Prints
AAAA
Press the
{{{{Clear/Stop}}}} key.
BBBB
Change the number of prints or
check the completed prints.
Note
❒ When you change the number
of prints, you can re-enter the
number with the number keys
after pressing the
{{{{Clear/Stop}}}}
key.
CCCC
Press the
{{{{Print Start}}}} key.
Titanium_GB-F_FM.book Page 22 Thursday, December 26, 2002 10:13 AM