Ricoh PRIPORT JP730 - Manual (Page 36)

Operation
30
1
AAAA
Press the
{{{{Combine}}}} key.
BBBB
Place the first original face down
in the document feeder.
Note
❒ The first original will be printed
on the leading part of the print.
CCCC
Specify the reproduction ratio and
check that the correct paper size is
loaded.
DDDD
Press the
{{{{Master Making}}}} key.
EEEE
The beeper sounds after the first
original has been stored. Place the
second original face down in the
document feeder.
Note
❒ If you wish to select a different
reproduction ratio for the sec-
ond original, you need to enter
the new settings before the
beeping stops.
FFFF
Press the
{{{{Master Making}}}} key.
GGGG
Check the image position on the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {{{{Image
Position
}}}} key (see p.18 “Shifting
the Print Image Position For-
wards or Backwards”) or by
moving the position of the pa-
per (see p.19 “Shifting the Print
Image Position to the Right or
Left”).
Titanium_GB-F_FM.book Page 30 Thursday, December 26, 2002 10:13 AM