Ricoh PRIPORT JP730 - Manual (Page 53)

x Clearing Misfeeds
47
4
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals
Note
❒ The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5 mm, 0.2".
❒ a: 5 mm, 0.2"
❒ Remove staples or clips of originals. Fan originals that have had staples or
clips removed.
When “
x x x x”, “B B B B” and “A” light up
A paper misfeed occurs in the paper feed section.
R CAUTION:
AAAA
Lower the paper feed tray adjustment lever.
BBBB
Slowly but firmly pull out the paper.
Original Print
• Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
a
Titanium_GB-F_FM.book Page 47 Thursday, December 26, 2002 10:13 AM