Ricoh PRIPORT JP730 - Manual (Page 26)

Operation
20
1
Adjusting the Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways to do this:
❖ ❖ ❖ ❖ Before Making a Master
Adjust the image density using the
{{{{Image Density}}}} key.
❖ ❖ ❖ ❖ After Making a Master
Adjust the image density using the
{{{{Speed}}}} key.
Before Making a Master
AAAA
Use the
{{{{Image Density}}}} key before
pressing the
{{{{Master Making}}}} key.
After Making a Master
AAAA
Press the {{{{Speed}}}} key to decrease
the printing speed. Press it again
to bring the printing speed back
to Fast.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Titanium_GB-F_FM.book Page 20 Thursday, December 26, 2002 10:13 AM