Replenishing supplies, Loading paper into the paper feed tray, Replenishing paper – Ricoh PRIPORT JP730 User Manual
Page 43
37
3. Replenishing Supplies
Loading Paper into the Paper Feed Tray
The Load Paper indicator (
B) and the
machine indicator “A” lights when
the paper feed tray runs out of paper.
Replenishing Paper
AAAA
Press the
{{{{Clear/Stop}}}} key.
Note
❒ This step is necessary only if
you want to pause a print run to
replenish paper.
BBBB
Lower the paper feed tray adjust-
ment lever.
Note
❒ The top sheet of paper might re-
main between the feed rollers.
In this case, remove the top
sheet.
CCCC
Load paper into the paper feed
tray.
Note
❒ Correct paper curl before set-
ting the paper.
DDDD
Shift the tray adjustment lever to
the paper feeding position.
Note
❒ Before you start printing, the
paper feed tray must be aligned
with the feeding position. If not,
a paper misfeed might occur.
EEEE
Press the
{{{{Print Start}}}} key to
resume printing.
Titanium_GB-F_FM.book Page 37 Thursday, December 26, 2002 10:13 AM