Ricoh PRIPORT JP730 - Manual (Page 114)

Operation
26
1
Separation Pressure Lever
A
To prevent double-feed, adjust
the paper separation pressure us-
ing the separation pressure lever.
Note
❒ Paper separation pressure can
be adjusted according to the pa-
per weights as shown in the fol-
lowing table.
*1 This position can also be used if
the leading edge of the paper is
curled, or when the paper does
not feed properly.
Posi-
tion Metric version Inch version
1 Use this position if the lead-
ing edge of the paper is
curled, or when the paper
does not feed properly at Po-
sition 2.
2 *1 35–47.0 g/m 2 ,
81.6–127.9
g/m
2
9.3 – 12.5 lb.,
21.7–34.0 lb.
3 47.1–81.5 g/m 2 12.6–21.6 lb.
4 Use this position when a
double-feed occurs.
5 Use this position if double-
feeds persist even after the
lever has been shifted to Po-
sition 4.
Titanium2_EN-F2_FM_forPaper.book Page 26 Wednesday, January 25, 2006 6:30 PM