Ricoh PRIPORT JP730 - Manual (Page 21)

Standard Printing
15
1
Standard Printing
- - - -Printing
In this manual, the word, “printing”
is used as opposed to “copying” in or-
der to distinguish between the proc-
ess that your machine uses to make
prints, and the process used by a
standard copier machine.
A standard copier scans in the origi-
nal for each copy set made. This ma-
chine, however, scans in your original
once and makes multiple prints from
this master.
This chapter describes the basic print-
ing operations that your machine is
capable of.
AAAA
Place the original face down in
the document feeder. Adjust the
original side guides to match the
size of the original.
Note
❒ You can only place one original
at a time.
BBBB
Press the
{{{{Master Making}}}} key.
A trial print is delivered to the pa-
per delivery tray.
CCCC
Press the
{{{{Proof}}}} key and check
the image density and image po-
sition on the proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
{{{{Image
Position
}}}} keys. See p.18 “Adjust-
ing the Print Image Position”.
❒ If the image density is too dark
or too light, adjust the image
density using the
{{{{Image Densi-
ty
}}}} key. See p.20 “Adjusting the
Print Image Density”.
Titanium_GB-F_FM.book Page 15 Thursday, December 26, 2002 10:13 AM