Adjusting the print image position, 1adjusting the print image position – Ricoh PRIPORT JP730 User Manual

Page 24

Advertising
background image

Operation

18

1

Adjusting the Print Image Position

After master making, you can adjust
the print image position to suit your
needs. There are two ways to do this:

Shifting the Image Position Forwards

or Backwards
Adjust the image position using
the

{{{{Image Position}}}} keys.

Shifting the Image Position to the

Right or Left
Adjust the image position by shift-
ing the paper in the paper feed
tray.

Shifting the Print Image Position
Forwards or Backwards

* Paper feed direction

AAAA

Press the left

{{{{Image Position}}}} key

to move the image forwards, and
the right key to move it back-
wards.

Note

❒ When you shift the image for-

wards, leave a margin (more
than 5 mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.

❒ The right or left {{{{Image Position}}}}

keys shift the image about 1
mm, 0.04" each time they are
pressed. However, the indicator
will only register a change
when the image position is
shifted about 5 mm, 0.2".

BBBB

Press the

{{{{Proof}}}} key to check the

image position.

GRFORW0E

Titanium_GB-F_FM.book Page 18 Thursday, December 26, 2002 10:13 AM

Advertising