Ricoh PRIPORT JP730 - Manual (Page 144)

Troubleshooting
56
4
When “x” and “E” light up
A
Check where the misfed master is. Remove the misfed master as follows:
When a master misfeed occurs in the master eject section
A Pull out the master eject box.
B Remove the misfed master.
Note
❒ Be careful not to stain your hands with ink when you touch used mas-
ters.
C Return the master eject box to its original position.
Note
❒ Set the drum unit and close the front door.
Titanium2_EN-F2_FM_forPaper.book Page 56 Wednesday, January 25, 2006 6:30 PM