Ricoh PRIPORT JP730 - Manual (Page 47)

Master Roll Replacement
41
3
Master Roll Replacement
The Master End indicator (
C) lights
up when it is time to replace the mas-
ter roll.
AAAA
Open the right side cover.
BBBB
Open the plotter cover.
CCCC
Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
Note
❒ When the Master End indicator
lights up, it is necessary to re-
place the master roll even if
some master remains on the old
roll.
DDDD
Make sure that the new master
roll is positioned as shown in the
illustration.
EEEE
Set the paper edge of the master
roll as shown.
Note
❒ Rotate the spools backward to
take up any slack in the master.
TSLH02EE
TSLT010E
TSLH01XE
TSLH01UE
Titanium_GB-F_FM.book Page 41 Thursday, December 26, 2002 10:13 AM