Where to put your machine, 5where to put your machine, Environmental conditions – Ricoh PRIPORT JP730 User Manual

Page 72

Advertising
background image

Remarks

66

5

Where to Put Your Machine

Your machine's location should be carefully chosen because environmental con-
ditions greatly affect its performance.

Environmental Conditions

Optimum environmental conditions

R CAUTION:

R CAUTION:

R CAUTION:

• Temperature: 10 – 30

°C, 50 – 86°F

• Humidity: 20 – 90%RH
• A strong and level base (a sturdy desk and cabinet etc.)
• The machine must be level within 5 mm, 0.2" both front to rear and left to

right.

• Make sure to locate this machine in a large well ventilated room that has an

air turnover of more than 30 m

3

/hr/person.

Environments to avoid

• Locations exposed to direct sunlight or strong light (more than 1500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air

from a heater. (Sudden temperature changes might cause condensation with-
in the machine.)

• Places where the machine might be subjected to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.

Keep the machine away from humidity and dust. Otherwise a fire or an elec-

tric shock might occur.

Do not place the machine on an unstable or tilted surface. If it topples over,

an injury might occur.

If you use the machine in a confined space, make sure there is a continuous

air turnover.

After you move the machine, use the caster fixture to fix it in place. Other-

wise the machine might move or come down to cause an injury.

Titanium_GB-F_FM.book Page 66 Thursday, December 26, 2002 10:13 AM

Advertising