Olympus C-2100 - Manual (Page 114)

114
RECORDING—using the flash (Cont.)
Ⅵ
Taking pictures using the FL-40 external flash by itself
See steps 1 and 2 in Taking pictures using both the main flash and the FL-40
external flash (P.112)
3 Make sure that the main flash is
closed. If it opens at any time
during shooting, close it.
4 Press (Flash mode button) to
display the available modes on the
control panel. Modes will be
displayed in the following order:
Auto-Flash (no display), Red-Eye
Reduction Flash
, Fill-in Flash
, FLASH OFF .
3
4
When using both the FL-40 external flash and the main flash
●
If close-up pictures are overexposed, try using the main flash by itself.
●
When the main flash and the FL-40 are used together, the main flash is
used as the compensating light source. This means that if the amount of
light from the FL-40 is insufficient (beyond its working range), the resulting
pictures may be underexposed.
When using the FL-40 external flash by itself
●
The extension flash may occasionally misfire.
Note: