Olympus C-2100 - Manual (Page 137)

137
Special Effects ~ Function Shooting
“BLACK & WHITE” lets you shoot in black and white picture, while “SEPIA”
adds a sepia (brownish tint) to your image. “WHITE BOARD” lets you take a
picture and superimpose letters on a white board, while “BLACK BOARD”
does the same with a black board. When the Mode dial is set to
, only
“BLACK & WHITE” and “SEPIA” are available.
1 Press .
●
The Menu screen appears.
2 Press on the Arrow pad and
select "FUNCTION", then press .
3 Press and select an item
(see above), then press the OK
button.
●
If the OK button is pressed again,
the setting is stored and the Menu
screen disappears. The normal
screen comes back on.
4 Take a picture.
4
1
2, 3
BLACK&WHITE
SEPIA
WHTE BOARD
BLACK BOARD
OFF
[ 4 / 5 ]
F2.8 1/800 0.0 P
CARD
SETUP
FUNCTION
BLACK&WHITE
SEPIA
OFF
[ 2 / 3 ]
F2.8 1/800 0.0
MODE
SETUP
CARD
SETUP
FUNCTION
Still Picture Recording Menu Movie Recording Menu
●
When "WHITE BOARD" or "BLACK BOARD" is selected, the flash mode is
set to
(flash override). (P. 107)
●
Adjust the exposure if letters are not clearly recorded with “WHITE BOARD”
or “BLACK BOARD” selected. (P. 99)
●
When “ALL RESET” is off (p.148), current settings are retained even when
the power is turned off.
●
When the Mode dial is set to ,“WHITE BOARD” and “BLACK BOARD”
are turned off.
●
White balance cannot be used.
Note: