Olympus C-2100 - Manual (Page 78)

78
ERASING IMAGES (Cont.)
All-frame erasure
1 Set the mode dial to .
●
The card access lamp will blink and
a list of stored images will be read
out. After that, the last recorded
picture will be displayed.
2 Press (Menu button).
●
The menu screen will be displayed.
3 Select CARD SETUP, then .
4 Press the OK button.
●
A message asking you to confirm
the erasure will appear.
To cancel:
Press
on the Arrow pad to select
NO, then press the OK button or
(Erase button).
5 Make sure that YES is selected
and press the OK button.
●
All of the images stored in the
SmartMedia card will be erased.
2, 4 1
5, 6 3
[ 1 / 1 ]
CARD
SETUP
MODE
SETUP
FUNCTION
Still image erasure menu screen
[ ] YES NO
Confirmation screen