Olympus C-2100 - Manual (Page 117)

117
RECORDING—Others
Taking pictures in sequence — Sequential mode
Use this mode to take pictures in sequence. When the shutter release button
is held down, the camera will take pictures in sequence. Picture-taking will
stop when you release your finger from the button. A max. 2 frames/sec. is
available in this mode. (in all record modes except TIFF) Press
to
change the function of this mode. The sequential mode includes:
Single-picture Shooting (no display): Takes only one picture when you
press the shutter button. (Initial setting)
Sequential Shooting ( ): Takes pictures in sequence. Focus, brightness
(exposure), and white balance are locked at the first frame. Up to 5
frames can be taken in sequence at once. The approximate recording
speed during Sequential mode and the number of still pictures that can
be stored is shown below.
AF sequential Shooting ( ): Takes pictures in sequence. Focus,
brightness (exposure), and white balance are metered and adjusted in
each frame. The speed of picture-taking slows down. Up to 5 frames can
be taken in sequence at once. The approximate recording speed during
Sequential mode and the number of still pictures that can be stored is
shown below.
Self-timer/remote-control ( ): Takes pictures with the self-timer/remote-
control. See P.119 to 121 for further information.
Auto bracket (BKT): Takes pictures in sequence. The camera will adjust the
brightness (exposure) in each frame. Focus and white balance are
locked at the first frame. See P.102 for further information.
Recording speed during Sequential mode and number of still pictures
that can be stored
Record mode
Recording speed during Number of storable
Sequential mode still pictures
TIFF Not available.
SHQ 1.5 frames/sec approx. 5
HQ 1.8 frames/sec approx. 16
SQ (640 X 480) 2 frames/sec approx. 86
●
When using the flash, the speed of sequential shooting slows down, to allow
the flash to recharge.
Note: