Olympus C-2100 - Manual (Page 123)

123
5 Press the OK button, then take the
picture.
●
Settings will be stored and the
menu screen will disappear.
●
0.5 seconds after the shutter is
released, sound recording will start.
6 During recording, turn the camera
microphone towards the subject.
●
During recording, the recording
mark on the control panel will blink
and a bar showing that recording is
proceeding will be displayed.
●
When the camera is more than 1m
from the subject, sound cannot be
recorded clearly.
●
During recording, it is not possible
to take the next picture.
૽૽
Recording a sound memo using
an external microphone
Connect an external microphone to the
camera’s external microphone jack and
turn the microphone towards the
intended subject. The built-in
microphone is disabled when an external
microphone is used.
૽૽
In the Display mode
Sound can be added to still pictures
already taken.
[ P.139
5
External
Microphone
Plug
External
Microphone
jack
Microphone
Control Panel
Sound record mark
●
This function is not available in TIFF. Sound can be added later to still
pictures. (P.139)
●
This function is not available when the drive mode is set to sequential
shooting
or auto bracket .
Note: