Olympus C-2100 - Manual (Page 94)

94
RECORDING—range/focus (Cont.)
Setting the focus manually — Manual focus
Use this function to focus manually.
1 Press the OK button.
●
The focus mode selection menu
appears.
2 Press on the Arrow pad to
select MF.
●
and the distance indicator
appear on the control panel.
3 Press to select the focal
length.
●
The display will be magnified to
make focusing easier.
●
When the distance indicator is
moved to less than 3.25 ft, the
display will switch to a shorter
distance (3-15/16" to 3.25 ft).
4 Press the OK button.
●
The setting is stored and MF
appears in red.
●
To cancel Manual focus, press the
OK button to display MF, then
press
to select AF. Press the
OK button.
૽૽
Focusing is not possible at
∞
:
● Although MF is displayed and the
distance indicator at the top of the bar,
focusing may not be possible at
∞
.
When this occurs, press to reset
the display.
2, 3
1, 4
P F2.8 1/800 0.0
AF MF
16ft
10ft
6.5ft
2.6ft
Control panel
Manual focus
●
When using the flash, shoot within the flash working range.
●
Unless OFF is selected in All Reset, the setting will be canceled when the
power is turned off (p.148).
●
The distances shown on the screen are for reference only.
●
The picture may go out of focus when the Zoom lever is pressed in the
Manual focus mode.
Note: