Olympus C-2100 - Manual (Page 133)

133
6 Aim the camera at the subject and
press
(Multi-Metering button).
●
At the bottom of the screen, a
progress bar appears.
●
Brightness readings are ignored
after the 9th reading.
●
When you press , all metered
values are reset.
●
When you press , the Multi-
Metering average (up to that point)
is memorized (AE Memory).
7 Take a picture.
6 7
F2.8 1/125 0.0 P
eg. : When metering 2 points. (pressing button twice)
The average values for the aperture and shutter speed as calculated by
metering 2 points. These values are recalculated every time another meter-
ing point is added.
indicates the aver-
age for the 2 meter-
ing points. The
average is always
shown at the center
of the bar.
ᮢ indicates how
much the present
exposure you are
metering is different
from the average
exposure value.
The present expo-
sure can be fixed
by pressing the
shutter button
halfway down.
(The present expo-
sure is not added to
the average value
unless you press
the
button.)
When
ࡗ
moves ±3 far from the center of the bar (the average reading), the
red appears.
The reading with the button pressed.
ࡗ
indicates the number of times you have
pressed the button .
ࡗ
indicates the difference
between the metered and average readings.