Macro mode – Olympus C-2100 User Manual

Page 90

Advertising
background image

90

MACRO MODE

1

Press

to display “

” on the

control panel.

To cancel the Macro mode, press
the Macro button repeatedly until
the “

” goes off on the control

panel.

2

Take picture.

When you use the flash in the Macro mode, the flash may not have the
proper effect. Confirm the result on the display.

Unless OFF is selected in “All Reset”, the setting will be canceled and reset
to off when the power is turned off. (p.148)

Note:

Use the Macro mode to shoot subjects at close range. You can get as close
as 4 inches to your subject (when the zoom lever is set to “W” to the
maximum position), allowing you to fill the entire frame with your subject.

Each time you press

, “

” goes on and off.

Control panel

Macro mode

2

1

Mode/Control panel

Shooting range

WIDE (W)

TELE (T)

No Macro (No indication)

23.6" to

6.5ft to

Macro (

)

3.9" to 23.6"

3.25ft to 6.5ft

Advertising
This manual is related to the following products: