Olympus C-2100 - Manual (Page 28)

28
NAMES OF PARTS (cont.)
Press the Monitor button ( ) to select whether images appear on the
Monitor or in the viewfinder. Press the INFO button to select how much
information is displayed (P.26). The following 3 types of display are available.
Viewfinder/Monitor indications (Picture information)
1 Flash stand-by/Jitter warning/flash
charge (P. 72/108)
2 AF confirmation mark (P. 68)
3 Shooting mode (P. 44)
4 Battery check (displayed after the
camera is turned on and when
warnings appear) (P. 60)
5 Aperture value (P. 87/89)
6 Shutter speed (P. 88)
7 Exposure compensation/
Exposure differential (P. 99)
8 AF target mark (P. 67/68)
9 Memory gauge (P. 69)
0 Number of storable pictures
! Drive mode (P. 102/117–120)
@ Metering mode (P. 100)
# Macro mode (P. 90)
$ White balance (P. 134)
% ISO (P. 101)
^ Record mode (P. 104)
& Flash mode (P. 106)
* Slow shutter synchronization flash
(not displayed when the flash is in
the flash override mode) (P. 111)
( Stabilization system (P. 97)
F2.8 1/800 +2.0 P 2
8
3
4
1
5 6 7
9
0
F2.8 1/800 +2.0
ISO100
SQ
P
SLOW1
!
@
#
$
%
^
&
*
(
Record mode
Only the AF target mark: Warnings (AF
confirmation mark and battery check) appear
when required. Settings that are changed are
displayed for approx. 2 seconds.
Partial information: When using the
camera, these indications are displayed for
approx. 2 seconds.
Full information: These indications are
displayed constantly in the Record mode.