Toshiba RAM-SM560BT-E - Manual (Page 76)

73
4
AIR DUCTING WORK
Hanging of indoor unit
Lift up the unit with a lifter, etc., and set the hanging metal in the
hanging bolt.
• Hook nut of the hanging bolt to the groove of the hanging metal on
the main unit.
• Using the level, etc., install the main unit horizontally.
Failure to do this will cause water leakage
Hanging bracket
Washer
Nut
Hanging bolt
Mounting of filter and canvas for suction port
1. Mount a long-life filter or a high-performance filter according to each Installation Manual.
2. Mount the canvases for suction port to the lower side of the above filter.
Mounting of remote controller
For the mounting of the wired remote controller, refer to the Installation Manual attached to the remote controller.
• Take out the remote controller cord together with the refrigerant pipe or drain pipe. Be sure to set the remote
controller cord so that it passes through the upper side of the refrigerant pipe and drain pipe.
For reference
<Square duct>
(Procured locally)
28
D
A
18 18
25
28
28
18 18
25
28
E K K F1
5
I
28
25
25
25
H
A
J J
28
B
C
A
18 18
25
28
28
18 18
25
28
E F1
5
I
28
25
25
25
H
A
J J
G-Ø5 mm holes G-Ø5 mm holes
Return Air side
For supply
air side
For return
air side
Supply Air side
J K I H G F E D C B A
— — 226 350 4 409 439 — 400 — 700
350 — 226 500 8 409 439 — 430 700 1000
227.5 130 132.5 275 22 245 265 530 65 455 (65 x 7) 550
307.5 130 132.5 425 30 245 265 830 65 715 (65 x 11) 850
RAV-SM560BT-E
Model
RAV-SM800BT-E
RAV-SM560BT-E
RAV-SM800BT-E
Return Air side
(Return filter side)
Supply Air side