Trimble Outdoors 5700 - Manual (Page 101)

5700 GPS Receiver User Guide 8 5
Static and FastStatic Surveying 7
Appl
icatio
ns
3. Do one of the following:
– If the Trimble Survey Controller software is being used to
start the survey, follow the guidelines in the Trimble Survey
Controller Reference Manual.
– Press
p on the 5700 receiver and wait until the red SV
Tracking LED starts flashing slowly.
4. On the 5700 receiver, press
d.
5. Logging begins, and the Logging/Memory LED lights up.
6. In a FastStatic survey, the Logging/Memory LED starts flashing
slowly when enough data has been collected.
7. When you have collected enough data for your application, hold
down
d for 2 seconds to stop logging.
8. Hold down
p for 2 seconds to turn the receiver off.