Trimble Outdoors 5700 - Manual (Page 35)

5700 GPS Receiver User Guide 1 9
Setting up the Receiver 2
Op
eration
Figure 2.7 RPA and bracket
4. Mount the Zephyr antenna on the range pole.
5. Connect the GPS antenna cable. Make sure that the GPS cable
is not hanging over the top of the RPA.
6. Connect the blue TNC-to-TNC cable (Part Number 41299) to
the RPA.
DO
NOT
RO
UT E CA
BL
E ON
OU
TS
I
RPA
GPS antenna
cable
Pole
RPA
bracket
TNC port
(aligned over
antenna cable)