Trimble Outdoors 5700 - Manual (Page 160)

1 3 Event Marker Input and 1PPS Output
1 4 4 5700 GPS Receiver User Guide
Refer
ence
Using an application file
The Configuration Toolbox software lets you create an application file
containing the appropriate configuration instructions for event marker
input. You can then transfer that file to the 5700 to enable event
marker input.
For more information, see Configuration Toolbox Software, page 68,
or refer to the Configuration Toolbox Help.
To create an application file that enables event marker input:
1. Connect the computer to the 5700 receiver.
2. Press
p to power on the 5700 receiver.
3. To start the Configuration Toolbox software, click ,
then select Programs / Trimble / Configuration
Toolbox / Configuration Toolbox.
The main Configuration Toolbox window appears.
4. Select File / New / 5700 to display the Configuration File
dialog.
5. From the Available list select Device, then click Add .