Trimble Outdoors 5700 - Manual (Page 71)

5700 GPS Receiver User Guide 5 5
Configuration 4
Op
eration
When you apply the current settings in the GPS Configurator
software, each defined survey session is sent to the 5700 receiver as a
pair of timed application files: the first includes the logging settings
and start time, and the second contains settings that stop logging at the
end time (which is calculated automatically from the duration you
specify).
For more information on scheduled survey sessions, refer to the GPS
Configurator Help.
The 5700 receiver can store up to 20 application files, so you can
define a maximum of 10 scheduled survey sessions (10 pairs of
start/stop timed application files).
Note – You cannot use the Configuration Toolbox software to define
timed application files.
Sleep mode
Whenever you press
p to turn off the 5700 receiver, it checks for a
timed application file that is due to be activated in the future. If one
exists, the receiver goes into Sleep mode instead of powering down.
In Sleep mode, the yellow Logging/Memory LED flashes every three
seconds. The receiver wakes up five minutes before the scheduled
activation time, so that it is ready to begin logging at the scheduled
time.