Refer ence – Trimble Outdoors 5700 User Manual
Page 161
Advertising
5700 GPS Receiver User Guide
1 4 5
Event Marker Input and 1PPS Output
1 3
Refer
ence
6.
Complete the dialog as shown below. In the Triggering Edge
field, select Positive or Negative, depending on which type of
pulse the external device uses:
7.
To save the application file to your computer, click
Save
.
8.
Click
Transmit
to send the application file to the connected
receiver. The message
Communicating with receiver
appears,
followed by a message giving details of the transfer.
9.
Click
Close
to exit the Configuration File dialog.
10. If you have not saved the application file, a message appears,
prompting you to save your changes.
11. Select File / Exit to close the Configuration Toolbox software.
Advertising