Trimble Outdoors 5700 - Manual (Page 36)

2 Setting up the Receiver
2 0 5700 GPS Receiver User Guide
Op
eration
Mounting the 5700 receiver
To mount the 5700 receiver on the pole:
1. Attach the receiver bracket to the pole:
a. Place the bracket against the pole, approximately 0.5 m
from the ground.
Note – If you are using a 1" diameter pole, flip the black
insert around inside the bracket as shown in Figure 2.8.
Figure 2.8 Receiver bracket insert
b. Close the gates of the bracket around the pole.
c. Seat the base of the clip lock in the opposite gate.
d. Lock the clip lock down.
Bracket insert Bracket
1
1
/
4
" pole
1" pole