Trimble Outdoors 5700 - Manual (Page 85)

5700 GPS Receiver User Guide 6 9
Software Utilities 6
Op
eration
4. Transfer this application file to the receiver.
5. Check that the receiver is using the transferred application file.
To create and save an application file to the receiver:
1. To start the Configuration Toolbox software, click ,
then select Programs / Trimble / Configuration
Toolbox / Configuration Toolbox.
2. Select File / New / 5700.
3. Specify the receiver settings (for specific information, refer to
the Configuration Toolbox documentation).
4. Use File / Save As to save the application file.