Trimble Outdoors 5700 - Manual (Page 166)

1 3 Event Marker Input and 1PPS Output
1 5 0 5700 GPS Receiver User Guide
Refer
ence
7. From the State field, select Enable:
8. If you want to save the application file to your computer, click
Save .
9. Click Transmit to send the application file to the connected
receiver. The message Communicating with receiver appears,
followed by a message box giving details of the success or
failure of the transfer.
10. Click Close to exit the Configuration File dialog.
11. If you have not saved the application file, a message appears,
prompting you to save your changes.
12. Select File / Exit to close the Configuration Toolbox software.