Toshiba VF-FS1 User Manual
Toshiba, Industrial inverter, Instruction manual
Advertising
Table of contents
Document Outline
- Cover
- I. Safety precautions
- II. Introduction
- Contents
- 1. Read first
- 2. Connection
- 3. Operations
- 4. Basic VF-FS1 operations
- 5. Basic parameters
- 5.1 Setting acceleration/deceleration time
- 5.2 Specifying an operation mode, using parameters
- 5.3 Selection of operation mode
- 5.4 Meter setting and adjustment
- 5.5 Standard default setting
- 5.6 Forward/reverse run selection (Operation panel operation)
- 5.7 Maximum frequency
- 5.8 Upper limit and lower limit frequencies
- 5.9 Base frequency
- 5.10 Selecting control mode
- 5.11 Manual torque boost - increasing torque boost at low speeds
- 5.12 Setting the electronic thermal
- 5.13 Preset-speed operation (speeds in 7 steps)
- 6. Extended parameters
- 6.1 Input/output parameters
- 6.2 Input signal selection
- 6.3 Terminal function selection
- 6.4 Basic parameters 2
- 6.5 Frequency priority selection
- 6.6 Operation frequency
- 6.7 DC braking
- 6.8 Auto-stop in case of lower-limit frequency continuous operation
- 6.9 Jump frequency - jumping resonant frequencies
- 6.10 Bumpless operation
- 6.11 PWM carrier frequency
- 6.12 Trip-less intensification
- 6.13 Droop control
- 6.14 Conducting PID control
- 6.15 Setting motor constants
- 6.16 Acceleration/deceleration time 2
- 6.17 Protection functions
- 6.18 Forced fire-speed control function
- 6.19 Adjustment parameters
- 6.20 Operation panel parameter
- 6.21 Communication function (Common serial)
- 6.22 Parameters for options
- 6.23 Permanent magnetic motors
- 7. Applied operation
- 8. Monitoring the operation status
- 9. Measures to satisfy the standards
- 10. Peripheral devices
- 11.Table of parameters and data
- 12. Specifications
- 13. Before making a service call - Trip information and remedies
- 14. Inspection and maintenance
- 15. Warranty
- 16. Disposal of the inverter
- Buck cover