Thermador PO301 - Manual (Page 28)

English 24
Cleaning Guide
Part Recommendations
Broil Pan and Grid Wash with hot soapy water. Rinse thoroughly and
dry, or gently rub with cleansing powder or soap-
filled pads as directed. DO NOT clean broil pan
and grid in the self-cleaning oven.
Rotisserie Wash with hot soapy water. Rinse thoroughly and
dry, or gently rub with cleansing powder or soap-
filled pads as directed. Soak the forks and skewer
in warm soapy water for maximum one hour. The
food soil can then be easily removed. DO NOT
clean rotisserie parts in the self-cleaning oven.
Flat Rack Wash with hot soapy water. Rinse thoroughly and
dry, or gently rub with cleansing powder or soap-
filled pads as directed. DO NOT clean the rack in
the self-cleaning oven.
Telescopic Rack Wash with hot soapy water. Rinse thoroughly and
dry, or gently rub with cleansing powder or soap-
filled pads as directed. Avoid getting cleansing
powder in the telescopic slides. Relubrication may
become necessary. Use only high-temperature
food-grade lubricants or PAM to re-lubricate
slides.
DO NOT clean the rack in the self-cleaning oven.
Fiberglass Gasket DO NOT CLEAN GASKET.
Glass Wash with soap and water or glass cleaner. Use
Fantastik® or Formula 409® to remove grease
spatters and stubborn stains.
Painted Surfaces Clean with hot soapy water or apply Fantastik® or
Formula 409® to a clean sponge or paper towel
and wipe clean. Avoid using powder cleaning
agents, steel wool pads and oven cleaners.
Porcelain Surfaces Immediately wipe up acid spills like fruit juice, milk
and tomatoes with a dry cloth. Do not use a moist-
ened sponge/cloth on hot porcelain. When cool,
clean with hot soapy water or apply Bon-Ami® or
Soft Scrub® to a damp sponge. Rinse and dry. For
stubborn stains, use soap-filled pads. It is normal
for porcelain to show fine lines with age due to ex-
posure to heat and food soil.
Stainless Steel Surfaces Always wipe or rub in the direction of the grain.
Clean with a soapy sponge, then rinse and dry, or
wipe with Fantastik® or Formula 409® sprayed on
a paper towel. Protect and polish with Stainless
Steel Magic® and a soft cloth. Remove water
spots with a cloth dampened with white vinegar.
Use Bar Keeper's Friend® to remove heat discol-
oration.
Plastic & Controls When cool, clean with soapy water, rinse and dry.
Printed areas (words and
numbers) Do not use abrasive cleansers.