6. remote control and its functions – Toshiba RAS-13UAV-E2 User Manual
Page 35
FILE NO. SVM-03008
– 34 –
8-6. Remote Control and its Functions
8-6-1. Parts name of remote control
1
1
1
1
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2
2
2
2
2
START/STOP button
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
push the button twice.
3
3
3
3
3
Mode select button (MODE)
Push this button to select a mode.
Each time you press the button, a mode is
selected in a sequence that goes from A : Auto
changeover control, : Cool, : Dry, : Heat,
: Fan only, and back to A.
(A receiving beep is heard.)
4
4
4
4
4
Temperature button (
)
,
....... The set temperature is increased up to
30
°
C.
9
....... The set temperature is dropped down to
17
°
C.
(A receiving beep is heard.)
5
5
5
5
5
Fan speed button (FAN)
Push this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed from among five settings.
(LOW , LOW
+
, MED
, MED
+
,
HIGH
)
(A receiving beep is heard.)
6
6
6
6
6
Auto louver button (SWING)
Push this button to swing the louver.
(A receiving beep is heard.)
Push the FIX button to stop the louver swinging.
(A receiving beep is heard.)
7
7
7
7
7
Set louver button (FIX)
Push this button to adjust the air flow direction.
(A receiving beep is heard.)
8
8
8
8
8
Off timer button (OFF)
Push this button to set the OFF timer.
9
9
9
9
9
On timer button (ON)
Push this button to set the ON timer.
!
!
!
!
!
Reserve button (SET)
Push this button to reserve time settings.
(A receiving beep is heard.)
"
"
"
"
"
Cancel button (CLR)
Push this button to cancel ON timer and OFF
timer. (A receiving beep is heard.)
#
#
#
#
#
High power button (Hi-POWER)
Push this button to start the high power operation.
$
$
$
$
$
Memory button (MEMO)
Keep pushing the MEMO button for 2 seconds
from the beginning, or keep pushing the button for
2 seconds after pushing it once for a short time.
Then the set data is stored in the memory and
is displayed.
%
%
%
%
%
Automatic operation button (AUTO)
Push this button to operate the air conditioner
automatically.
&
&
&
&
&
ECO timer button (ECO)
Push this button to start the ECO timer (OFF
timer) operation.
You can select the OFF timer from among four
settings (1,3,5 or 9 hours).
(
(
(
(
(
FILTER button
Push this button to turn off the filter cleaning lamp
on the indoor unit.
Push this button after cleaning the air filter.
)
)
)
)
)
PRESET button
Push this button to operate the air conditioner
according to settings memorized by the MEMO
button.
~
~
~
~
~
TIMER button
Use this button to change the clock, ON timer, and
OFF timer times.
To forward the time, push the “TIMER ” button.
To set back the time, push the “TIMER ” button.
PRESET
FAN
MODE
Hi-POWER
ON
OFF
SET
CLR
ECO
AUTO
TIMER
CLOCK CHECK
RESET
FILTER
1
4
4
FIX
SWING
MEMO
START/STOP
13
13
14
14
11
11
3
15
15
12
12
10
10
18
18
17
17
13
14
11
3
15
12
10
18
17
2
5
6
7
9
8
16
16
2
5
6
7
9
8
16
A
B
AUTOA