Xantrex Technology PV225S-480-P - Manual (Page 22)

Introduction
1–2 152606
Description of the PV225S
The PV225S 225 kW Grid-Tied Photovoltaic Inverter is a UL 1741 Listed, utility
interactive, three-phase power conversion system for grid-connected photovoltaic
arrays with a power rating of 225 kW. Designed to be easy to install and operate,
the PV225S automates start-up, shutdown, and fault detection scenarios. With
user-definable power tracking that matches the inverter to the array and adjustable
delay periods, users are able to customize start up and shut down sequences.
Multiple PV225S inverters are easily paralleled for larger power installations.
The PV225S power conversion system consists of a pulse-width modulated
(PWM) inverter, switch gear for isolation and protection of the connected AC and
DC power sources, and a custom high-efficiency Wye:Wye isolation transformer.
Housed in a rugged NEMA-3R rated, powder-coated steel enclosure, the PV225S
incorporates sophisticated Intellimod
®
(IPM) Insulated Gate Bipolar Transistors
(IGBTs) as the main power switching devices. An advanced, field-proven,
Maximum Peak Power Tracker (MPPT) integrated within the PV225S control
firmware ensures the optimum power throughput for harvesting energy from the
photovoltaic array.
The advanced design of the PV225S includes an EMI output filter and the main
AC contactor located electrically on the utility side of the isolation transformer.
The location of the main AC contactor, and the ability to de-energize the isolation
transformer during times of non-operation, greatly reduces the night-time tare
losses consumed by an idle isolation transformer. An integrated soft-start circuit
precludes nuisance utility-tie circuit breaker trips as the result of isolation
transformer inrush current.
Additionally, the PV225S integrated controller contains self-protection features
including over and under voltage and frequency safeguards. An integral
anti-island protection scheme prevents the inverter from feeding power to the grid
in the event of a utility outage. The PV225S includes a local user interface
comprised of an O
N /O FF switch, keypad, and 4-line, 80 character LCD display. A
user-friendly, Graphic User Interface (GUI) provides a remote interface for
operator interrogation of PV225S system status, control, metering/data logging
and protective functions within the PV225S. The status, control, and logging
features are also supported by the choice of three communication mediums,
allowing the information to be accessed or commanded remotely.
The PV225S comes in two modules comprised of six enclosures to house the
electronics described above. The first module includes the Main Inverter
Enclosure, Inductor Enclosure, DC Interface Enclosure, and Communications
Enclosure. The second module includes the Transformer Enclosure and AC
Interface Enclosure. These components are identified in Figure 1-1 on page 1–3.
Figure 1-1 also shows the dimensions and locations of the various enclosures that
comprise the PV225S.
See “Layout Options” on page 2–6 for information on configuration options.