Xantrex Technology PV225S-480-P - Manual (Page 51)

Unloading
152606 3–3
Moving the PV225S
To move the PV225S while it is still inside the shipping crates:
1. Place the forks of the forklift below the shipping crate at the points specified
on the shipping crate.
2. Lift the main inverter and the AC Interface Enclosure and Transformer
Enclosure from beneath their shipping crates.
Unpacking the PV225S
To unpack the main inverter and the AC Interface Enclosure and
transformer assembly from their shipping crates:
1. Using a claw hammer or pry bar, remove the crate’s wood top and side panels.
2. Remove the main inverter’s anchor hardware that attaches it to the shipping
pallet.
3. Remove the AC Interface Enclosure and transformer assembly anchor
hardware that attaches them to their shipping pallet.
c
CAUTION: Equipment Damage
To move the PV225S, use a forklift that has a sufficient lift capacity and has a 26" fork
span.
Figure 3-1 Moving the crated PV225S