Xantrex Technology PV225S-480-P - Manual (Page 55)

Opening or Closing Access Doors
152606 3–7
Figure 3-5 AC Interface Access Door
Figure 3-6 DC Interface Access Door
Door Latches
To Open Access Door:
1. Confirm that the AC Disconnect Switch
handle is placed in the OFF (Open)
position prior to opening the door.
2. Loosen the bolts on door latches and
slide away from the door.
3. Pull open from right side.
To Close Access Door:
1. Confirm that the AC Disconnect Switch
handle is placed in the OFF (Open)
position prior to closing the door.
2. Close the door and slide the latches
back over the edge of the door.
3. Tighten the bolts on door latches.
Door Latches
To Open Access Door:
1. Confirm that the DC Disconnect Switch
handle is placed in the OFF (Open)
position prior to opening the door.
2. Loosen the bolts on door latches and
slide away from the door.
3. Pull open from the left side.
To Close Access Door:
1. Confirm that the DC Disconnect Switch
handle is placed in the OFF (Open)
position prior to closing the door.
2. Close the door and slide the latches
back over the edge of the door.
3. Tighten the bolts on door latches.