Xantrex Technology PV225S-480-P - Manual (Page 40)

Planning
2–6 152606
Layout Options
The PV225S is shipped as two separate assemblies and can be arranged as shown
in Figure 2-1 or Figure 2-2.
The PV225S can be arranged in a number of different system layout options to fit
specific site requirements. The AC Interface/Transformer assembly may be co-
located adjacent to the left side of (or behind) the Main Inverter Enclosure up to,
and not exceeding, 15 feet away.
Given the flexibility to co-locate the AC Interface/Transformer assembly to fit a
desired system layout, the interconnect AC power conductors and conduit
between the Main Inverter Enclosure and the AC interface/transformer assembly
are to be supplied by the installer. See Figure 2-1 and Figure 2-2, depicting two
options for locating the AC interface/transformer assembly adjacent to the main
inverter.
Figure 2-1 PV225S Layout Option A
Minimum Dimension of Base:
Approximately 14 ft. by 5 ft. (4.3 m x 1.5 m)