Xantrex Technology PV225S-480-P - Manual (Page 52)

Installation
3–4 152606
Removing the Pallet and Moving the PV225S
To move the PV225S using a forklift:
1. Place the forks of the forklift below the unit at the points specified in
Figure 3-2.
2. Lift the PV225S from beneath the respective enclosures.
Be sure to use a forklift with a 26" fork span.
3. Remove the pallet from beneath the unit.
4. Once the pallets are removed from the units, use the same lifting locations to
lift the units into the place where they are to be permanently located.
c
CAUTION: Equipment Damage
To move the PV225S, use a forklift that has a sufficient lift capacity and a 26" fork span.
Figure 3-2 Forklift Lifting Locations - Underneath Unit
26" (66 cm)
fork span
26" (66 cm)
fork span
Lift Here
Lift Here