ZyXEL Communications 202H - Manual (Page 101)

Prestige 202H User’s Guide
Dial-in Setup 10-9
Configuring Menu 13:
Figure 10-6 Configuring Menu 13 for Remote Access
Configuring Menu 14.1
Figure 10-7 Edit Dial-in-User
The caller always controls Idle Timeout, so this field does not apply when there is
callback.
Menu 13 - Default Dial-in Setup
Telco Options:
CLID Authen= None
PPP Options:
Recv Authen= PAP
Compression= Yes
Mutual Authen= No
O/G Username=
O/G Password= ********
Multiple Link Options:
Max Trans Rate(Kbps)= 128
Callback Budget Management:
Allocated Budget(min)=
Period(hr)=
IP Address Supplied By:
Dial-in User= Yes
IP Pool= Yes
IP Start Addr= 192.168.250.250
IP Count(1,2)= N/A
Session Options:
Edit Filter Sets= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
This must be
PAP for
Windows®.
IP Pool for RAS
Clients.
Menu 14.1 - Edit Dial-in User
User Name= Name
Active= Yes
Password= ********
Callback= No
Phone # Supplied by Caller= N/A
Callback Phone #= N/A
Rem CLID=
Idle Timeout= 300
Press ENTER to Confirm or ESC to Cancel:
The User Name and
Password must be the
same as in Dial-Up
Networking in Windows®