ZyXEL Communications 202H - Manual (Page 245)

Prestige 202H User’s Guide
SMT Menus 24.8 to 24.10 22-3
Menu 24.9.1 - Call Control Parameters
Dialer Timeout:
Digital Call(sec)= 60
Retry Counter= 0
Retry Interval(sec)= N/A
Press ENTER to confirm or ESC to Cancel:
Please enter a number from 5 to 300
22.2.1 Call Control Parameters
Menu 24.9.1 shows the call control parameters. Enter 1 from Menu 24.9 to bring up the following menu.
Figure 22-4 Menu 24.9.1Call Control Parameters
Table 22-1 Menu 24.9.1Call Control Parameters
FIELD DESCRIPTION
Dialer Timeout:
Digital Call (sec)
The Prestige will timeout if it cannot set up an outgoing digital call within the
timeout value. The default is 30.
Retry Counter How many times a busy or ‘no answer’ telephone number is retried before it is
put on the blacklist. The default is 0 and the blacklist control is not enabled.
Retry Interval (sec) Elapsed time after a call fails before another call may be retried. This applies
before a telephone number is blacklisted.
22.2.2 Black List
Menu 24.9.2 shows the blacklist. The phone numbers on the blacklist are numbers that the Prestige had
problems connecting to in the past. The only operation allowed is taking a number off the list by entering its
index number. Enter 2 from Menu 24.9 to bring up the following menu.