ZyXEL Communications 202H - Manual (Page 74)

Prestige 202H User’s Guide
8-2 Remote Node Configuration
Step 2. When Menu 11 appears as shown in the following figure, enter the number of the remote node
that you wish to configure.
Figure 8-1 Menu 11 Remote Node Setup
When Menu 11.1. – Remote Node Profile appears, fill in the fields as described in the following table to
define this remote profile. The following table shows you how to configure the Remote Node Menu.
Figure 8-2 Menu 11.1 Remote Node Profile
Menu 11 - Remote Node Setup
1. ChangeMe (ISP, NAT)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter Node # to Edit:
Menu 11.1 - Remote Node Profile
Rem Node Name= nodename
Active= Yes
Call Direction= Outgoing
Incoming:
Rem Login= N/A
Rem Password= N/A
Rem CLID= N/A
Call Back= N/A
Outgoing:
My Login= ChangeMe
My Password= ********
Authen= CHAP/PAP
Pri Phone #= 1234567
Sec Phone #=
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP= No
Telco Option:
Transfer Type= 64K
Allocated Budget(min)= 0
Period(hr)=
Schedules=
Carrier Access Code=
Nailed-Up Connection= No
Toll Period(sec)= 0
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
Edit IP Options in menu
11.3.
Edit Filter Sets in menu
11.5.
Edit PPP Options in
menu 11.2.